Skip to main content
Search By Vehicle
A USA CompanyA USA CompanyFactory Based In Northern Minnesota
Lifetime WarrantyLifetime WarrantyHighest Quality Products Guaranteed
Free Shipping In USFree Shipping In USWorldwide Shipping Available
Certified ASNU CenterCertified ASNU CenterSpecialists In Fuel Injector Services
Five Star RatingFive Star RatingOver 24K Reviews

Direct Email: CustomerCare@CSPReman.com

Fuel Injector Servicing Professional Cleaning & Flow-Testing on ASNU Machine

Fuel Injector Servicing Professional Cleaning & Flow-Testing on ASNU Machine

Write a Review
SKU:
0011YY-GA
Avaliability:
In Stock
Availability:
Usually takes 2-3 business days once we receive your cores
Fuel Injector Servicing
Price: $19.99

Professional Fuel Injector Cleaning and Servicing

$19.99 Standard Gas Injectors

$49.99 Throttle Body Injectors

*(Price is PER injector)*

Get your cores running like-new again for a fraction of the cost of new injectors.

 

What you get:

  • Upon arrival, each individual injector is tested for coil resistance, leaks, spray pattern, and flow rate. They are tested side-by-side for an accurate comparison and flow-results results are recorded. We can test up to 8 injectors side by side on one machine.

  • The old and brittle components are removed and the injectors undergo a three step ultrasonic cleaning. They first get cleaned on the outside of the injectors, then they are set up on an electronic pulsing machine which cleans the internals. The solution is very mild and is safe and biodegradable. The ultrasonic waves to the bulk of the cleaning. Lastly, the injectors are "back-blown", a process which eliminates any internal debris from the injector.

  • Injectors receive brand new components including: o-rings, micro-filters, grommets, spacers, pintle caps, etc. Old, used components can be the cause of a variety of issues, specifically leaking problems. Your old components will be returned to you in a sealed bag with your rebuilt injectors.

  • Rebuilt and cleaned injectors are flow-tested again on the ASNU machines and results are recorded on the flow-sheet. Our machines use a special proprietary fluid which conditions and further protects the injectors' internals. This protects the injectors from internal rusting as well as prevents the injector from getting stuck open or stuck closed. We have been using this fluid for over 15 years.

  • This service includes a flow-result documentation which shows before and after flow-results and comparison charts. This will show the flow-matching percentage. 

 

Once you place your order, you will receive a follow-up email with shipping instructions for your injector cores. If you have any questions about the process, please reach out to us at: CustomerCare@CSPReman.com

We are more than happy to help!

1 1

All orders are shipped within 1-2 business days from when payment is received.

Transit time varies based on service type requested:

First Class Mail: 3-7 business days
Priority Mail: 2-3 business days
Express Mail: 1-2 business days
Free Shipping options are generally First Class Mail.

For international shipments, make sure your address information is accurate. CS Performance assumes no liability once package leaves the United States. Please be sure your country is accepting packages from the US and you are aware of any duties or taxes your country may require upon package arrival.

Core Returns are completely optional and not required. When you order a set of fuel injectors from us, eligible part numbers will have a paper slip inside the shipping box. This paper slip will have all of the additional information regarding the return of your old cores for a varying price (depending on the part number you are looking to send in).

If your old cores are not eligible to be returned, you will not receive this paper slip within the shipping box, and no further action is required.

Thank you for your time and business, we appreciate it greatly!

Description

Professional Fuel Injector Cleaning and Servicing

$19.99 Standard Gas Injectors

$49.99 Throttle Body Injectors

*(Price is PER injector)*

Get your cores running like-new again for a fraction of the cost of new injectors.

 

What you get:

  • Upon arrival, each individual injector is tested for coil resistance, leaks, spray pattern, and flow rate. They are tested side-by-side for an accurate comparison and flow-results results are recorded. We can test up to 8 injectors side by side on one machine.

  • The old and brittle components are removed and the injectors undergo a three step ultrasonic cleaning. They first get cleaned on the outside of the injectors, then they are set up on an electronic pulsing machine which cleans the internals. The solution is very mild and is safe and biodegradable. The ultrasonic waves to the bulk of the cleaning. Lastly, the injectors are "back-blown", a process which eliminates any internal debris from the injector.

  • Injectors receive brand new components including: o-rings, micro-filters, grommets, spacers, pintle caps, etc. Old, used components can be the cause of a variety of issues, specifically leaking problems. Your old components will be returned to you in a sealed bag with your rebuilt injectors.

  • Rebuilt and cleaned injectors are flow-tested again on the ASNU machines and results are recorded on the flow-sheet. Our machines use a special proprietary fluid which conditions and further protects the injectors' internals. This protects the injectors from internal rusting as well as prevents the injector from getting stuck open or stuck closed. We have been using this fluid for over 15 years.

  • This service includes a flow-result documentation which shows before and after flow-results and comparison charts. This will show the flow-matching percentage. 

 

Once you place your order, you will receive a follow-up email with shipping instructions for your injector cores. If you have any questions about the process, please reach out to us at: CustomerCare@CSPReman.com

We are more than happy to help!

1 1 Shipping Info

All orders are shipped within 1-2 business days from when payment is received.

Transit time varies based on service type requested:

First Class Mail: 3-7 business days
Priority Mail: 2-3 business days
Express Mail: 1-2 business days
Free Shipping options are generally First Class Mail.

For international shipments, make sure your address information is accurate. CS Performance assumes no liability once package leaves the United States. Please be sure your country is accepting packages from the US and you are aware of any duties or taxes your country may require upon package arrival.

Core Return

Core Returns are completely optional and not required. When you order a set of fuel injectors from us, eligible part numbers will have a paper slip inside the shipping box. This paper slip will have all of the additional information regarding the return of your old cores for a varying price (depending on the part number you are looking to send in).

If your old cores are not eligible to be returned, you will not receive this paper slip within the shipping box, and no further action is required.

Thank you for your time and business, we appreciate it greatly!